HIKOKI MV(36V) 無刷套筒扳手(6分) WR36DF+5.0AH*1+充電器套裝香港行貨 HIKOKI
HIKOKI MV(36V) 無刷套筒扳手(6分) WR36DF+5.0AH*1+充電器套裝香港行貨 HIKOKI

HIKOKI MV (36V) brushless socket wrench (6 points) WR36DF + 5.0AH * 1 + charger set Hong Kong licensed

sold in last hours
People are viewing this right now
HK$3,480.00
Add to WishlistCompare
Ask a Question
Description

MV(36V) Brushless Socket Wrench(6 points) WR36DF

Pictures of WR36DF

Features

  1. Maximum tightening torque 1,900 Nm
  2. Equipped with brushless motor

MaruchiboltoBrushless Motor

Model Specifications MV Battery
(BSL36A18) 		Fast charger
(UC18YSL3) 		Hook
WR36DF (2XCP) 2 pcs ● ●

Specifications (Specifications)

Locking capacity Ordinary bolts M12 to M36
High Strength Bolts M10 to M27
Maximum tightening torque 1,900 Nm
 Tested with M30 high-strength bolts (strength grade F10T) with hexagon socket (tightening time 6 seconds)
motor Brushless DC Motor
No-load revolutions 4 0 to 1,500 /min
3 0 to 1,200 /min
2 0～900 /min
1 0～600/min
Number of hits 4 0 to 2,600 /min
3 0 to 2,200/min
2 0 to 1,900/min
1 0 to 1,600/min
Anvil (square drive head) size 19mm
Body size (length x height x center height) 221 x 290 x 42mm (including BSL36A18)
weight 3.9kg (including BSL36A18)
Usable batteries MV Battery
Standard accessories Batteries, chargers, hooks, battery covers
  1. NOTE: The manufacturer reserves the right to change parts and accessories specifications etc. without prior notice.
  2. Conventional batteries (BSL3620/3625/3626/3660 and BSL18XX, BSL14XX series) cannot be used.
  3. Charging time may be longer depending on ambient temperature and the condition of the battery.

Powerful torque performance! *1

Maximum release torque: 2,400 N·m *2
Maximum tightening torque: 1,900 N·m *3

  1. As of December 2022. Domestic power tool manufacturers in Japan (according to our research)
  2. The locking torque of M30 high-strength bolts can be loosened within 6 seconds.
  3. Tightening conditions: Tighten M30 high-strength bolts for 6 seconds

Smart features to improve work efficiency

Automatic stop function (clockwise rotation)
It stops automatically at the set time to prevent the bolt from being over-tightened.

1 2 3 4
Indicator Lights

No-load revolutions 600 /min 900/min 1,200/min 1,500/min
Automatic stop time The attack stops 1.2 seconds after it starts
Job Application Temporary fastening of steel frames, etc. Temporary fastening of truck wheel nuts and pipes, etc. Temporary fastening of heavy machinery and steel beams, etc.

Automatic slow function (counterclockwise rotation)
Automatically stops and shifts at set times and speeds, helping to prevent the nut from falling off.
* Only when the switch is pressed fully.

1 2 3 4
Indicator Lights

Automatic slow function Switch pressure when looseness is detected (maximum value) After detecting that the bolt is loose, it stops for 0.5 seconds and then restarts, rotating at a speed of 60-350/min.
* Will not stop spinning after restart.
Switch press amount when looseness is detected (mid-range value) After detecting that the bolt is loose, it will stop for 0.5 seconds and then restart to reduce the speed.
Depends on how far the trigger is pressed after restarting.
* Will not stop spinning after restart.
60~330/min 60~500/min 60~660/min 60~830/min
Job Application Used to loosen bolts and nuts, etc.
  • This feature helps prevent the nut from falling out during loosening operations.
  • Depending on various conditions such as the size of the bolt and nut, the socket used, and the tightening conditions, the nut may be disengaged from the threaded portion during operation, which may cause the nut to accidentally fall off.

Dust and water resistant

IP56*

  • A special windshield structure (patented) that prevents dust ingress and full resin coating of major components provide IP56 dust and water resistance, minimizing damage to the product even in dusty workplaces or unexpected rain.

  • Products that meet the IP56 standard are designed to be resistant to dust and water, but we do not guarantee that they will not malfunction.
    Do not use or place in excessive dust, water or rain. The battery is installed in the tool body and only the tool body meets the IP56 protection level. We do not guarantee the dust and water resistance of the battery.

Work per Charge (approximately) *

Job Description Ah Work per Charge (approximately) *
Bolt tightening M27×90 (F10T)
Locking time 1.8 seconds 		2.5Ah (MV) Approx. 160
M24×85 (F10T)
Locking time 1.2 seconds 		Approx. 250
  • Please use this content as a reference only. It may vary depending on the usage environment and battery condition.

Reviews