HiKOKI 12V Cordless Brushless Impact Driver WH12DD
12V Peak Brushless Impact Driver WH12DD
Features
- Tightening torque 135Nm
- Equipped with brushless motor
| ability | Small screw | 4 - 8mm |
|---|---|---|
| Self-tapping screws | ø3.5 - ø5mm | |
| Ordinary bolts | 5 - 14mm | |
| High Strength Bolts | 5 - 12mm | |
| Tip shape | Hexagonal opposite side, width 6.35mm | |
| Tightening torque | Max. 135Nm (1,375 kgf・cm) | |
| No-load revolutions | Soft Mode | 0 - 1,300/min (times/min) |
| Strong/self-tapping screws | 0 - 3,200/min (times/min) | |
| Number of hits | Soft Mode | 0 - 2,500/min (times/min) |
| Strong/self-tapping screws | 0 - 4,000/min (times/min) | |
| Body size (length × height × width) | 134×219×28.5 mm (Including BSL1240M) |
|
| weight | 1.1 kg (including BSL1240M) | |
| Battery available | Sliding Lithium Battery BSL 12XX Series | |
| Battery | model | BSL1240M |
| Voltage - Capacity | 12V Peak-4.0Ah | |
| charger | model | UC12SL |
| Charging time ※ | About 60 minutes | |
| Standard accessories | Battery (BSL1225M*2 or BSL1240M*2), charger (UC12SL), carrying case, battery cover | |
※Charging time may be longer depending on the usage environment and battery condition.
NOTE: The manufacturer reserves the right to change specifications of parts and accessories without prior notice.
Lightweight and easy to use
-
The shortest overall length in its class (134mm) for easy maneuverability *
* As of November 2018. At home power tool manufacturers (based on research by Japanese companies)
Workload per Charge (Typical) *
-
About 500 wood screws
ø3.8x 50mm screw, without pilot hole
- Use BSL1240M battery. These values are for reference only. They may vary depending on conditions.
Other Features
- In three-stage locking mode (soft/strong/self-tapping screw)
- With LED light
12V PEAK Slide Li-ion Battery
-
4.0Ah / BSL1240M
High Capacity -
2.5Ah / BSL1225M
Lightweight and compact with large capacity
-
Lightweight and compact, it has a high capacity of 4.0Ah. (Only for BSL1240M)
Battery charge, battery high temperature and battery fault status (only for BSL1225M/BSL1240M)
-
You can use the battery charge indicator to check status such as battery charge, battery high temperature and battery failure.
| Light on status |  Light Up |
 Light Up |
 Light Up |
 Light Up |
 Flash |
|---|---|---|---|---|---|
| Battery level | 75% or more | 50 to less than 75% | 25 to less than 50% | Less than 25% | 0% |
| Light on status |  Flash |
 Flash |
|---|---|---|
| Battery Status | Output stopped due to high temperature* 1 | Output stopped due to fault*2 |
- Remove the battery from the tool body and allow to cool sufficiently.
- The battery may be faulty, consult your dealer.
| style |
Cleaner, Set: Battery (BSL1225M (2.5Ah) * 2) + Charger (UC12SL), Set: Battery (BSL1240M (4.0Ah) * 2) + Charger (UC12SL) |
|---|