新機到貨HiKOKI 12V 12V Peak 無刷衝擊起子機WH12DCA+4.0AHx1+充電器套裝 HiKOKI
新機到貨HiKOKI 12V 12V Peak 無刷衝擊起子機WH12DCA+4.0AHx1+充電器套裝 HiKOKI

[Hong Kong licensed goods] Japan Hikoki Hitachi HIKOKI- Brushless Impact Screwdriver WH12DCA 12V High Torque Super Torque Screwdriver + 4.0AHx1 + Charger Set Hong Kong Licensed Goods

sold in last hours
People are viewing this right now
HK$1,880.00 HK$780.00

shape: net machine

net machine
Package: HiKOKI 12V WH12DCA+4.0AHx1+charger package
Description

New machine arrival report!!
HiKOKI 12V WH12DCA

Product advantages:
1. Maximum tightening torque 170 Nm
2. Equipped with brushless motor
3. IP56 waterproof and dustproof standard

12V is the first in the market to use a three-claw hammer mechanism to increase screw tightening speed

Compact head length: 114mm
Lightweight: 1.2kg (with BSL1240M installed)

Specification

ability Small screw 4-8mm
Ordinary bolts M5 to M16
High Strength Bolts M5 to M12
Self-tapping screws ⌀3.5~⌀6
Coarse thread screw 22-125mm
Maximum tightening torque *1 (Tightening time: 3 seconds) Maximum 170 Nm
M16 high-strength bolt (strength grade 10.9), using socket adapter + hexagon socket
Hexagonal shaft width across flats 6.35mm
No-load revolutions *1 Soft Mode 0 ~ 900 /min
Powerful Mode 0 ~ 3,400 /min
Bolt Pattern Single/Continuous attack: 0 ~ 3,200 /min
Self-tapping screw mode 0 ~ 3,700 /min
Number of hits *1 Soft Mode 0 ~ 1,800 /min
Powerful Mode 0 ~ 3,900 /min
Bolt Pattern Single/Continuous attack: 0 ~ 3,900 /min
Self-tapping screw mode 0 ~ 1,900 /min
Body size (length x height x center height) 114 x 223 x 29 mm (with BSL1240M installed) / Head length: 114 mm
weight 1.2 kg (with BSL1240M installed)

The 12V Peak power tool uses a three-claw hammer mechanism for the first time, greatly increasing the screw tightening speed.

Lightweight and easy to operate

Maximum tightening torque: 170Nm

Compact head length: 114mm

Lightweight: 1.2kg (with BSL1240M installed)

Image using WH12DCA

Screw tightening time comparison

Condition:ナゲシビス⌀5.3×120L, eucalyptus

Comparison of working speed between WH12DCA and traditional product WH12DD
  • Compared with the old product WH12DD. The values ​​are for reference only. Varies by material and condition.
  • The smaller the number, the shorter the locking time.

Even at low speeds, the motor will not get stuck or stop running

By improving the control mechanism, the motor will not stop running even at low speed

Reduced drill bit runout

Reduce drill bit bounce, prevent slipping, and prevent screws from falling when operating with one hand.

Improve switch operability

More delicate operation is achieved by lowering the minimum speed and reducing the trigger travel. In addition, the modification of the trigger shape allows for more delicate operations.

Balanced lighting with 3 LED lights

Uses 3 LEDs to illuminate a wide area,
It is not easy to form shadows in the working area

LED lighting picture 1
LED lighting picture 1

Multiple mode switching to improve work efficiency

Provide 5 modes

Switchable to 5 modes

IP56 dust and water resistance rating

The special windshield structure and full resin coating of main components can prevent the ingress of dust, and it has IP56 waterproof and dustproof performance, which minimizes damage to the product in dusty workplaces or sudden rain.

Please note
Products that meet the IP56 standard are designed to be resistant to dust and water, but we do not guarantee that they will not malfunction. Do not use or place the tool in excessive dust, water or rain.
Only the tool body meets the IP56 protection level, we do not guarantee the dust and water resistance of the battery.

Operation per Charge

Job Description Capacity Workload
Screw tightening work Wood Screws ⌀3.8mm × 45mm (lauan material, no positioning hole) 4.0Ah About 540
Wood Screws ⌀4.3mm × 65mm (lauan material, no positioning hole) About 320 pieces
Machine screws M8×16 Approximately 2,100
  • The values ​​are for reference only. Depends on the state and condition of the battery.

Additional Information
shape

net machine, Package: HiKOKI 12V WH12DCA+4.0AHx1+charger package